GH2+2 is a fully automatic ceiling lift with a built-in motor for operation on the rail system.

• · The drive motor is permanently mounted (cannot be retro-fitted)
• · Unique construction
• · Takes up a minimum of space
• · Soft start & stop

• GH2+2 has the same lifting specifications as GH2 (max. 440 lbs. / 200 kg) and only differs by having this built-in drive motor.

Operation
GH2+2 operates fully automatically on the rail system by pressing the hand control (see drawing to the left):

• Lift
• Lower
• Moves the hoist towards the open arrow on the information face of the hoist.
• Moves the hoist towards the closed arrow on the information face of the hoist.

• When using a GH2+2, please note that the drive motor uses approx. 1 second to accelerate and stop the hoist, respectively. Thus, when stopping the unit from max. speed, the drive motor must be cut off 4 to 5 inches before the desired position.

When the hand control is activated for a shorter period of time, it is possible to position the hoist with a high level of accuracy.

GH2+2 must run on its own power and should never be pulled through the rail system.

Technical specifications for GH2+2
Total weight without lifting hanger: 20 lbs. (9.0 kg.)
Speed on straight rail at full load: 6"/sec. (15 cm/sec.)

Sound level acc. to DS/ISO 3746: Drive motor 52dB(A)

Electrical specifications for drive motor
Current consumption: 2.5A at full load
Periodic load (operation/pause): 20%, operation, 80% pause (20/80)